191 Howard Street  |  Franklin, PA 16323  |  Phone: 814.432.2200  |  Fax: 814.432.2201 |  Toll Free: 800.618.1101
Quality Products with Quality Service
1.800.618.1101
 


Fluid Recycling Systems

Oil Water Separators

Mist Eliminators

Filtration Equipment

Finishing Equipment:

   Horizontal Tumbling and Finishing Systems
   • Bench-Top Barrel Finishing
   •
Roller Barrels

  Tumblers
   • Tilt Barrel Tumbling Machine
   • Low-Temp Tumblers

  Vibratory Tubs

  Screen Separators

  Media Pans

  Magnetic Parts Separator

Videos

Request for Quote

Contact Us

Home


Tumblers > Item # TB-4

Tilt Barrel Tumbling Machines for Parts Deburring, Polishing, and Finishing - TB Series


Note: All Dimensions are approximate and subject to change without notice Note: Guards removed for clarity
Note: Guards removed for clarity Note: Guards removed for clarity

Specifications - Item # TB-4, Tilt Barrel Tumbling Machines TB Series
Barrel Bottom Dia. 22 in
Barrel Top Dia. 18 in
Barrel Depth 22 in
Volume 4 cu.ft
No Flats 12
Speed 10-36 rpm
Horse Power 1/2 hp
Width 39 in
Depth-Horizontal front of barrel to rear of frame 44 in
Height-Floor to top of frame 53 in
Height-To top of barrell @ 45 59 in
Dimensions-(A)-Run Position 18 in
Dimensions-(B)-Discharge Position 46 in
Weight-Crated for shipping 840 lb

Standard Features

A unique Safety Enclosed Housing provides safety protection features that reduce the possibility of accidental contact with the drive mechanism. The safety housing also guards against injuries from raising or lowering the barrel. A simple, easy-operating hydraulic system (except on portable Model TB-1) tilts the open- end barrel through a full 90 degrees. Barrel loading height is designed to facilitate easy loading of media or drying materials into the barrel without excessive lifting. The barrel can be readily lowered to the correct height for unloading onto standard screening or transfer equipment. Optional Power-Tilt is available (on all models except TB-1) with your choice of hydraulic or electrically actuated tilting system with bush-button control. Added features include electronic variable speed drive, our exclusive "No Seam" vinyl Plastisol™ barrel lining for highest cushion, wear-resistance and visibility, rigid welded construction, all resulting in reduced handling at lowest finishing costs.


Specifications

BARRELS
Open, conical type, made of welded steel plate.
BARREL LINING
No-Seam Vinyl Plastisol, rubber, or urethane lining.
DRIVE
Electronic Variable Speed, except Model TB-1 with mechanically variable speed. Model TB-1, 110 volts, 1 PH, 60HZ including barrel heater. All other models 230/460 volts, 3 PH, 50/60HZ including barrel heater. Specify voltage desired. Foreign voltages available at additional cost.
CONTROLS
Start-Stop Push Buttons, Variable Speed Adjust, 0-99 Hr. Cycle Timer, and overload protection are standard on all models. Model TB-1 had hand operated tilting system. All other models furnished with standard hand-hydraulic barrel tilting system.
FINISH
Machine enamel on all exposed surfaces of machine.
OPTIONAL EQUIPMENT

  • Electric rod radiant heating elements as follows:
    Model TB-1, 800 watts; TB-4, 2400 watts; TB-9, 5400 watts; TB-18, 10,800 watts. For electric dryers, outside top half of each barrel is aluminum coated for heat reflection. Bottom half coated black for maximum heat absorption. Separate control switch for heating elements.
  • Electric or hydraulic tilt system with push button controls.
  • Hinged barrel guard with safety interlock. Barrel covers - solid or perforated.


Request Information
 
    Oakland Products Inc.
436 Allegheny Blvd.
Franklin, Pa. 16323
Toll Free: 800.618.1101
Phone: 814.432.2200
Fax: 814.432.2201
Email: sales@oaklandproducts.com

Oakland Products distributes standard equipment, designs and builds custom systems for washing, filtration, high-pressure coolant, coolant recycling, and high-pressure cleaning.

Rampart Equipment Division of Oakland Products

Oil Water Separators  |  Mist Eliminators  |  Tumblers  |  Vibratory Tubs  |  Screen Separators
Media Pans  |  Magnetic Parts Separator  |  Videos  |   Request for Quote  |  Contact Us  |  Home